Typical house series P44T25. Typical house series P44T25 P 44 25 layout with dimensions

You can order the renovation of apartments in houses of the P-44TM / 25 series at competitive prices and excellent quality in the NEW MOSCOW company. We have extensive experience in repair and finishing works of any complexity, we use only high-quality materials and strictly comply with the terms of the contract.

Prices for the renovation of apartments in houses of the P-44TM / 25 series

Apartments in houses of the P-44TM/25 series

Construction regions
Moscow region, city of Moscow.

Construction technology
Panel.

By construction period
Modern.

Years of construction
From 2005 to the present.

demolition prospect
They do not require major repairs, they are not subject to demolition.

Number of sections / entrances
From 1 or more.

Number of floors
23-25, first floor - residential or non-residential.

Ceiling height
2.70

Balconies / loggias
Glazed balconies and loggias in all apartments except for the first floor

bathrooms
separate, in three-room apartments two toilets.

stairs
Smoke-free, there is access to a common balcony.

Garbage chute
Loading valve on each floor.

elevators
2 - passenger elevator for 400 kg, cargo-passenger for 630 kg.

Number of apartments per floor
4

Apartment areas

Ventilation
Natural extract through the ventilation unit in the hallway or bathroom.

Walls and cladding
External walls are made of reinforced concrete three-layer panels, consisting of two layers of concrete and a layer of polystyrene insulation, the total thickness is 30 cm, inter-apartment and inter-room load-bearing walls consist of reinforced concrete panels 18 cm thick, partitions are 8 cm thick, large-sized reinforced concrete slabs - ceilings, longitudinal inter-apartment walls and all transverse ones are load-bearing, in the end apartments all longitudinal walls are load-bearing, in two- and three-room apartments there is an opening 1 m wide between the kitchen and the room, the facade cladding is made in two versions - “brick-like” and “ under a stone", facing colors - dark orange, light red or sand, separate floors can be made with gray or brown facing, bay windows and half-windows of white and turquoise color.

roof type
Flat.

Manufacturer
DSK-1

Designers
MNIITEP

Advantages
The house has temperature-controlled heaters, electrical wiring copper, during construction, the technology of building a closed seam is used, the house is modern system security, reacting to the opening of the basement doors, switchboard and other technical rooms, there is a warning system in case of fire or flooding, in apartments with two and three rooms there are additional balconies and bay windows with an area of ​​17 - 20 sq.m.

disadvantages
The apartments in the houses of this series are large in area, this is reflected in the increase in their cost, the volume of construction of such houses is limited due to the slow pace of sales, new buildings of this series are being squeezed out of the housing market of Moscow and the region by the 25-storey modification of the P-44T and D-25H1 series ( Domkon-1, D/25).

Layouts of apartments in a house of a typical series P-44TM / 25

Well, now the final post about the 44th series. All considered
today, variations of the basic series have been developed already in the new millennium.
All of them are being built quite actively both in Moscow and in the Moscow region.
The most widespread in the Northern and North-Eastern
districts during the rehabilitation of a five-story building.

Series P44TM

Houses of the P-44TM series are more modern and comfortable compared to the previous ones.
houses of the P44, P44T, P44M series. IN panel house P-44TM series are located 1,2, 3 - room
apartments. Duplex apartments available. Compared to the P-44T series, this house has increased
areas of rooms and kitchens, half-windows appeared in 1-room apartments.
Completely removed the ventilation unit from the kitchen. He is now in the hallway or hiding in the bathroom.
The rest of the changes are cosmetic.
Exterior walls, consisting of three-layer panels 300 mm thick,
lined with decorative bricks as in P44T.

The heating system with automatic thermostats has also been improved.
Ventilation natural exhaust. Supply ventilation is still not observed.
However, in many Business projects, it is also impossible to find it during the day with fire ...

The windows are equipped with heat-shielding double-glazed windows with an increased coefficient of thermal insulation.

Technological features of the P-44TM house series:

Houses of the P-44TM/25 (TM-25) series

Houses of the P-44TM/25 (TM-25) series - industrial prefabricated 25-storey buildings
(there are also 23-storey buildings TM-23). Their constructive basis is based on
positive experience gained during the creation and operation of houses of the P-44T and P-44TM series.
External panels are faced with brick-like tiles.
Ceiling height - 2.8 m.
Glazing of balconies and loggias is provided.
When designing Special attention focused on fire safety.
To prevent the spread of fire from floor to floor into sewer risers
fire extinguishers installed.
There is a smoke-free staircase.
The houses are supplied with three elevators per entrance - one passenger and two cargo-passenger

• Floors - 25;
• Facing panels with tiles under the "brick";
• Set of apartments per floor:
  • 1-room (54.8 sq. m.)
  • 2-room (87.5 - 93.4 sq. m.)
  • 3-room (134.1 - 150 sq. m.)
• Provided - glazing of balconies and loggias;
• Height from floor to ceiling - 2.7 m.
• Thickness of external three-layer panels - 300 mm.
• Thickness of interroom walls - 180 mm.
• Two elevators with a carrying capacity - 400 and 630 kg.
• The three-room apartments have a guest bathroom and a bathroom attached to the bedroom.
• Roof - elements of inclined friezes are covered with BRAAS-DSK-1 tiles

Typical sections of residential buildings of the P-44TM / 25 series

All plans are clickable.

What you need to firmly remember in this series.

The lafa is over and the partition between the living room and the hall is in a three-ruble note
- became a carrier with a thickness of 18 cm.

Pictured is the former wall.

I foresee a mass disease - the demolition of this wall.
But an opening appeared in the kitchen .. But when the refrigerator does not fit, the opening is shifted ....
And there are already 25 floors.

Houses of the P-44K series

Project: MNIITEP, Workshop No. 1.
Chief architect of the project: Shumov V. B.
Chief project engineer: Kolganova M.V.

17 storey house with a reduced number of steps of transverse walls from seven to six,
as a result, a set of apartments on a typical floor 1-1-2-2.
Bearing transverse walls with a step of 3.0 and 3.6 m. Floor height from floor to floor 2.7 m.
One-room apartment 38.5 sq.m., two-room apartment - 62.0 sq.m. m.

High-altitude TM25s, the bulk of the P44t, and three P44k towers are visible in front on the left

Specifications:
Three-layer exterior panels 300mm thick (concrete - insulation (polystyrene) - concrete)
with a heat-reflecting metallized film inside the insulation (thermal insulation coefficient
like a brick wall 90 cm thick) lined decorative brick.
(High quality brick effect tiles providing effective protection
house structures from impact environment).
Closed joint between outer plates, providing additional
thermal insulation of the house and improving it appearance.
Internal walls are also made of reinforced concrete, while the thickness of the bearing
structures is 180 mm and 140 mm, and planning partitions - 80 mm.
Ceiling height— 2, 7m.
Additional sound and thermal insulation P44T is provided by installing
plastic double-glazed windows: plastic reinforced window blocks
advanced design, the windows are protected by heat-shielding
double-glazed windows with an increased coefficient of thermal insulation,
full sound insulation, filling with argon for better thermal protection.
Glazed balconies and loggias using high quality aluminum profile.
Roof, covered with natural tile BRAAS, which improves the aesthetic appearance of the house.
Heating appliances with temperature controllers.
copper wiring, providing additional fire safety Houses. Internal channels for electrical wiring are made at the time of panel formation,
which prevents damage in the future.
Ventilation natural exhaust through the ventilation blocks in the bathroom and in the corridor.
Elevators: Each entrance is equipped with two elevators of the Karacharovsky Mechanical Plant
(KMZ) with a carrying capacity of 400 kg (passenger) and 630 kg (cargo-passenger).
Hot water supply with top spill, which eliminates interruptions in water
during an increase in consumption.
Modern security system. Reaction to the opening of the basement doors, electrical panel,
attic, elevator shaft.
Warning system for flooding, fire, security system malfunctions.

This is Balashikha. The model shows D25, P44t, P44k

Typical layouts sections П44К

These catalog sheets are not quite according to P44k, this is a pre-series ...
There are differences, but in general they are insignificant ...

Pleasantly surprised IVD.

Series P-44TM/25 (TM-25)

Wall material: panel with "brick" and "stone" cladding

Number of sections (entrances): 1-3. Cases have been noted when a number of entrances in one building were built from block sections of the P-44TM / 25 series, and the other part (central or end) - from block sections P-44T. In such houses, the maximum number of entrances is 11

Number of floors: 23-25

Ceiling height: 2.70 m.

Elevators: 2 cargo-passenger and passenger

Balconies: glazed loggias in 1-room apartments. Glazed loggias and bay windows in 2- and 3-room apartments (there are also half-windows in the end and corner 2- and 3-room apartments)

Number of apartments per floor: 4

Years of construction: from 2005 to the present. time

Panel houses of the P-44TM / 25 (TM-25) type series in Moscow were built on the site of the demolished five-story buildings in Sviblovo, Northern Medvedkovo and Solntsevo, construction is also planned in one of the new quarters in Mitino. In the Moscow region, new buildings of the P-44TM / 25 (TM-25) series have been built / are being built in the cities of Krasnogorsk, Moskovsky and Lyubertsy

Number of houses built in Moscow: about 10, in the Moscow region (including those under construction) - about 10

Regulatory term operation of the house (according to the manufacturer - DSK-1) - 100 years

Areas of 1-room apartments (4 standard sizes): total: 53-55 sq. m., residential: 22-27 sq. m., kitchen: 14.4 sq. m.

Areas of 2-room apartments (4 standard sizes): total: 87-104 sq. m., residential: 48-50 sq. m., kitchen: 14-15.5 sq. m., in the end 2-room apartments, balconies 17-19 sq. m.

Areas of 3-room apartments (6 sizes): total: 130-152 sq. m., residential: 67-69 sq. m., kitchen: 18-21 sq. m., in the end 3-room apartments balconies 17-21 sq. m.

All rooms in the apartments of houses of the P-44TM / 25 (TM-25) series are isolated

Bathrooms: separate (in 3-room apartments there is a second toilet), bathtubs: standard, 170 cm long.

Stairs: smoke-free, with access to an open common balcony. Garbage chute: with a loading valve on each floor

Cooker type: electric

Walls: external reinforced concrete three-layer panels (concrete - polystyrene insulation - concrete) with a total thickness of 30 cm (the thermal insulation of which is brick wall 90 cm thick.) Inter-apartment and inter-room load-bearing - reinforced concrete panels 18 cm thick. Partitions - plasterboard 8 cm thick. Ceilings - large-sized ("per room") reinforced concrete slabs 14 cm thick.

Bearing walls: longitudinal inter-apartment and transverse all (inter-apartment and interior). In 2-room apartments in the load-bearing wall between the kitchen and the room there is a ready-made opening 1 m wide.

Type of sections (entrances): end, row (row), rotary (corner).

Number of steps (spans of transverse floors) in the section (entrance): 7, step width (distance between two adjacent load-bearing walls): 420 cm

Cladding, plastering of external walls: brick-like cladding, separate floors - stone-like cladding

External wall color options: dark orange, light red, sand, individual floors - gray, brown, bay windows and half bay windows - white, turquoise

Roof type: flat with sloping friezes made of BRAAS DSK-1 tiles, colors: gray, brown

Distinctive features: the P-44TM / 25 (TM-25) series of houses differs from its predecessor - the P-44T series (which has been under construction since 1997) by a greatly increased step width of the transverse load-bearing walls, the presence of huge balconies in the end sections (and, accordingly, increased areas of apartments), the presence of a second bathroom in 3-room apartments, as well as more diverse color options for exterior finishes

Other advantages: increased sound insulation, heaters with temperature controllers, copper wiring, "closed joint (seam)" technology, world standards for solidity and fire resistance (1st class), modern security system (response to the opening of basement, electrical room, attic doors , elevator shafts; warning system about flooding, fire).

Disadvantages: in the houses of this series, the areas of apartments are too large, which affects their cost. Due to the limited pace of sales of apartments in houses of the P-44TM/25 (TM-25) series, their construction volumes are low. Since 2010, it has been gradually ousted from the market of new buildings in Moscow and the Moscow region by a 25-storey modification of the P-44T series

Manufacturer: DSK-1 ( largest enterprise construction industry of Russia)

Designer: MNIITEP (Moscow Research Institute of Typology and Experimental Design)

Structural features and the appearance of the houses of the P-44TM / 25 (TM-25) type series are somewhat similar to the houses of the series,

P-44TM/25 (TM-25) - description, specifications, layouts

Houses of the P-44TM / 25 series are a new modification of the popular Moscow series of houses. In houses of the P-44TM / 25 series, the width of the transverse step of the supporting structures and, accordingly, the area of ​​\u200b\u200ball apartments have been increased. Years of construction: from 2005 to the present. Due to the high cost of apartments, the series is not being built very actively, in total about 20 houses have been built. The normative life of the house is 100 years.

In Moscow, houses of the P-44TM / 25 series were built mainly on the site of demolished five-story buildings in the microdistricts: Sviblovo, Severnoye Medvedkovo and Solntsevo. In the Moscow region, houses of the P-44TM/25 series have been built / are being built in new microdistricts of the cities: Krasnogorsk (Pavshinskaya Poyma), Moskovsky (LCD "Grad Moskovsky"), Lyubertsy (Krasnaya Gorka) and Reutov (Novokosino 2).

All rooms in the apartments of houses of the P-44TM / 25 series are isolated. All apartments have bay windows, half bay windows and spacious balconies. Each entrance has one passenger and two passenger-and-freight elevators. Bathrooms are separate in all apartments. Three-room apartments have additional bathrooms. The stairs are smoke-free, with a fire-prevention balcony. Stove - electric, natural exhaust ventilation, blocks in the kitchen and bathroom. Garbage chute on the stairs, with a loading valve on the platform.

The P-44TM / 25 series of houses differs from the basic version () in an increased step of transverse load-bearing walls from 3.6 m to 4.2 m. The areas of apartments have been respectively increased by 40-50%, the number of floors has been increased to 23-25. The areas of kitchens have also been significantly increased, more spacious balconies and additional bathrooms have been added. For the exterior design of the building, in addition to brick cladding, more diverse color schemes are provided.

The P-44TM / 25 series of houses, like all other series of the family, was designed specifically for. The design characteristics and appearance of the P-44TM / 25 series are in many ways similar to the houses of the series, and.

Due to low sales rates, construction volumes of the P-44TM/25 series are limited. Currently, this series is being forced out of the market in Moscow and the Moscow region by a 25-story modification of the series, as well as a series (Domkon-1, D / 25).

Detailed characteristics of the series

Houses of the P-44T25 series are an example of the beginning modern construction(from 2005 to the present). The ancestor of the series was the P-44T (from 1997 to the present), but more have been added to the new version modern features. The area of ​​apartments has significantly expanded due to bay windows and an increase in the width of the step of transverse load-bearing walls. The series has various names TM-25, P-44TM-25, P-44T25, P-44TM/25, etc.

The color scheme of the outer walls is varied: dark orange, light red, sand, separate floors - gray, brown, bay windows and half-windows - white, turquoise. In general, facing "under the brick", only on separate floors facing "under the stone". The number of floors varies from 23 to 25. The first floor can be both residential and non-residential. Number of entrances from 1 or more. Each entrance has a passenger lift 400 kg, two cargo-passenger 630 kg.

Panel houses of the P-44TM/25 series have 4 apartments on each site. All rooms in the apartments are isolated. IN one-room apartments living space 22-27m², kitchen 14-15m²; in two-room apartments 48-50 m², kitchen 14-16 m²; in three-room apartments 67-69 m², kitchen 18-21 m². The bathroom is separate, in three-room apartments there is a second toilet, bathrooms are 170 cm long. Ventilation is natural exhaust through ventilation blocks. All loggias and bay windows, except for the first floor, are glazed. Two- and three-room apartments have additional balconies 17-20 sq.m. . Garbage chute on each floor with a loading valve. The stairs lead to a shared balcony.

Internal inter-apartment walls - reinforced concrete panels without insulation, 18 cm thick. External walls - reinforced concrete three-layer panels (concrete - polystyrene-concrete insulation) with a total thickness of 30 cm (the thermal insulation of which is equal to a brick wall 90 cm thick.) . Gypsum concrete partitions 8 cm. Ceilings - reinforced concrete slabs 14 cm thick. Bearing walls - longitudinal inter-apartment (as well as all longitudinal walls in end apartments) and all transverse (inter-apartment and interior). In two- and three-room apartments in the load-bearing wall between the kitchen and the room there is a ready-made opening 1 m wide.

Advantages: increased sound insulation, heaters with temperature controllers, copper wiring, "closed joint (seam)" technology, world standards for solidity and fire resistance (1st class), modern security system (response to opening doors of the basement, switchboard, attic, elevator shafts; warning system about flooding, fire). Disadvantages: limited possibilities for redevelopment, in three-room apartments there are two ventilation boxes in the corridor, instead of one; high price.

Series of panel houses P-44TM/25 is not included in the list of demolished, the probability of demolition, even in the long term, is small.