Houses in Canadian. Canadian frame house construction technology

In cooperation with us, clients invariably receive a number of additional benefits. In particular, a five-year warranty applies to the entire range of services.

How to build a turnkey frame house using Canadian technology with minimal costs

Currently, there are a lot of modern technologies used in construction. But building turnkey frame houses is still the most profitable. The final cost of the house project is arranged by all clients who do not plan to spend a lot of money, wait for their arrival for a long time. It should be borne in mind that the construction of turnkey frame houses makes it possible, immediately after the construction of the walls and roof, to make a complete finish, since the buildings do not shrink, which means that you do not have to wait for the time of your settlement for several years.

The unique Canadian technology for the construction of frame houses, the price of which is also considered the most affordable of all available options for technological construction, allows you to save money and not give up additional cubic capacity, which will cost several times cheaper than, for example, the same area when building from bricks. We will carry out the installation of the house, taking into account all the norms and requirements that are applied in modern construction. Intel Group specialists have vast experience in the provision of such services. Currently, it is possible to build a turnkey frame house using Canadian technology with additional discounts on the action.

The most affordable price for a turnkey frame house using Canadian technology will allow you to solve the housing issue in a short time, and not postpone it indefinitely. A practical technology for building a turnkey house according to the Canadian system was developed taking into account the peculiarities of the climatic conditions of Russia. A frame house will be warm even in regions with harsh conditions, for example, in the Far North, such structures have proven themselves well even in cold winters.

Millions of owners have already appreciated Canadian houses, who were satisfied with all the conditions of construction, payment, and most importantly, received comfortable, modern, warm and cozy housing. Our prices for the construction of turnkey Canadian frame houses will suit the most demanding client.

Initially, you need to order the foundation for the construction of houses using frame technology according to the selected project. Features of the technology for the construction of prefabricated houses allow making lightweight pile foundations. This, in turn, is a guarantee that all work will be completed in the shortest possible time, the cost of the foundation itself will be 30-50 percent lower than when using traditional technologies.

Accordingly, the price of frame construction of a house is immediately reduced at the zero stage. Only the Canadian technology for the construction of frame houses, the price of which has been reduced, allows significant savings, which is why such options are increasingly chosen by citizens who have long dreamed of their own housing, but for one reason or another did not dare to start construction.

Fast execution of home projects at Intel Group is carried out by highly professional engineers who always take into account the basic requirements of the client. If necessary, you can opt for standard designs. Only we provide services in building a house at the most affordable prices, if we compare the prices of companies in Moscow or other large cities of Russia.

You can find out what is the price for a turnkey Canadian frame house on our website or at the company's office during a personal visit. We will build a house quickly, we will conclude an official cooperation agreement with each client who contacted our company. The catalog contains a large selection of typical designs. This means that we will build a house according to individual drawings or a finished project, which has already been tested and worked out taking into account all the wishes of our clients. The price of the house will suit you completely.

Canadian frame houses did not appear by chance. Prototypes of modern frame frames were erected in the early Middle Ages - these were structures of beams and racks connected to each other. The space between the posts and beams was filled with various materials - clay, brick, stone. What is the modern technology of frame housing construction, which attracts with the possibility of building a house in the shortest possible time at the lowest cost?

Frame construction technologies

Currently, several technologies of frame housing are used, they got their names from the countries in which they originated:

Norwegian or Scandinavian;
German;
Canadian.

In Russia, the most widespread Canadian technology for the construction of frame houses. This happened due to the similarity of the climate of the countries. In addition, the technology assumes wood construction- a building material with which there are no problems both in Canada and in Russia.

Particular attention should be paid to insulation, since the cost of heating the house depends on its quality and quantity. Professionals recommend using mineral wool for these purposes, since it has optimal thermal efficiency, fire safety and contains insignificant harmful substances. Besides, rock wool is quite economical.

Outside, the walls are finished with various materials - brick, vinyl siding, porcelain stoneware and so on. The joints between the outer skin and the installation sites of window and door openings are carefully sealed. Between the walls of the house and the outer sheathing are placed drain holes to prevent moisture build-up.

Roof installation

The rafter system is made of 5x10 cm boards. The lathing is made of smaller boards - 2.5 cm thick and 10 cm long. According to existing standards, the roof slope can be from 28 to 50 degrees. For convenience, the rafters are first assembled on the ground, and only then raised to the roof.

The distance between the rafters is about 70 cm. The structure is assembled in the form of the letter "L" and installed on the upper strapping.

Roofing materials are selected taking into account the preferences and financial capabilities of the homeowner - it can be corrugated board, flexible tiles, slate.

Advantages of Canadian technology houses

The popularity of the Canadian frame house construction technology is due to many factors:

Fast assembly and erection times.
No need for special equipment and heavy equipment.
No need for massive foundations.
The ability to build a Canadian home with your own hands.
The cheapness of building materials and work.
Houses are not subject to shrinkage like massive log houses or timber houses.
Insulation materials have high thermal efficiency.

Like most construction technologies, the Canadian one also has disadvantages that, with a competent approach, can be minimized or eliminated.

However, the use of impregnations, varnishes, as well as specially treated impregnated wood, minimizes these risks. It is also necessary to pay special attention to the sealing of the structure. All work is best done in dry weather, so that the tree does not have time to absorb moisture and is dry.

Thus, Canadian frame house construction is perfect for construction in the Russian climate. This is a great opportunity to build your own warm and beautiful home, investing a minimum of money and time.

Video: panel-frame houses using Canadian technology

As an example of practical, comfortable and reliable housing, Canadian homes have earned respect throughout the world. With proper insulation, they are able to maintain a comfortable indoor temperature in any cold months, even if severe Russian frosts have come.

Over the decades, house designs using Canadian technology have become even more sophisticated. Today it is the perfect combination of lightness and strength. And in view of the increasing popularity of cottage settlements, prefabricated houses using Canadian technology are increasingly being built in our country.

In order to understand why it is worth choosing exactly "wireframes", it is worth considering their features and advantages. It is a mistake to believe that quality should be expensive, because prices for prefabricated houses using Canadian technology suggest otherwise. Such an undoubted plus is caused by an optimized and well-calculated constructive project - no unnecessary building materials for future use, no additional costs for unplanned deliveries, no protracted work times. A Canadian home is fast, warm, comfortable and reliable!

House prices

The totality of all the advantages of Canadian houses suggests that North American residents, with their harsh climate, know a lot about construction like no one else. With the minimum expenditure of finance and time for the construction of frame country houses, cottages and mansions, their service life is not inferior to stone houses. You will get comfortable, reliable and quality housing in no time if you order prefabricated houses using turnkey Canadian technology.

For true connoisseurs of the best!

Frame houses using Canadian technology have one significant difference - thermal efficiency. This gives owners a huge advantage - savings in heating costs! To warm up a house in winter, you do not have to heat for hours, wait for the walls to warm up and only then the air. Plus, the prices for turnkey Canadian houses are much lower than for houses made of foam or aerated blocks. And the interior decoration in such houses can be done immediately after the end of construction, without waiting for the time for shrinkage to pass, like in lumber or log houses.

House projects using Canadian technology surprise with a variety of architectural solutions. And individual design makes it possible to realize any of your dreams - if you liked a cottage, you have a drawing or even a sketch of a house, it can be done using frame technology.

Advantages of Canadian panel houses from the Mechtaevo company:

Construction of a full-fledged residential building in the shortest possible time.
A wide variety of design options and architectural solutions.
Shrinkage resistance - Canadian panel houses can be finished inside immediately.
High degree of thermal insulation, allowing you to easily endure even severe frosts.
Reliability and durability in operation.

"Mechtaevo" - we vouch for the quality!

Due to their reliability, practicality and affordable prices, focused on the domestic consumer, frame houses using Canadian technology are gaining more and more popularity in Russia. But who should be entrusted with the implementation of the project and construction of your Canadian home, and what criteria should be used to choose a company that will take on these issues? After all, possession of Canadian construction technology alone is not enough. From how high-quality materials the company uses, how reliable its suppliers are, how professional and responsible the teams are, your home will last as long.

You can be absolutely sure that the Mechtaevo house will meet all the declared quality and reliability requirements. This is confirmed by many years of experience in the design and construction of turnkey Canadian frame houses and grateful customer reviews. By choosing a house using Canadian technology in our company, you will receive everything you need to live and relax in your home. Our clients always receive a multi-stage quality control system for construction work - your object will be controlled by a foreman and a technical supervision service. Your Canadian home will be exactly what you dreamed of!

You can familiarize yourself with options for finished projects with all room layouts on our website. For detailed information about prefabricated Canadian houses, organizational issues, prices for the delivery of building materials, the possibility of a loan and installments, check with the company's managers.

Construction of Canadian houses

The construction of Canadian houses is a promising technology for the construction of country houses. It is in demand in Germany, Scandinavia and other European countries, and has recently gained popularity in our country. Lightweight and compact designs allow you to quickly build both large cottages and small high quality country houses.

These structures are based on durable elastic panels, which significantly reduce the load on the ground. SipKanHouse LLC has many years of experience in the construction of Canadian houses and the supply of the necessary materials in Moscow. For the manufacture of such objects, we use only natural raw materials from environmentally friendly wood.

In addition to the efficiency of construction, it should be noted that there are other advantages of houses from LLC "SipKanHouse":

High thermal insulation qualities;
The ability to embody any design ideas;
Environmental Safety;
Long service life;
Strength;
Affordable price.

Stages of building houses using Canadian technology

The construction time for frame houses on average takes about three months, this is taking into account the delivery of the object to the customer on a turnkey basis, which is an undoubted advantage. For the construction of walls and partitions, sip-panels made of natural materials (chipboards filled with expanded polystyrene) are used.

They are distinguished by increased strength, elasticity and are able to withstand large horizontal loads. The construction of houses from vulture panels is carried out in several stages:

Site preparation for construction. 1st stage - marking the territory and setting flags for screwing in screw piles (pipe section 108 mm). 2nd stage - includes screwing in screw piles using special equipment to the freezing depth (1700-1800 mm). 3rd stage - piles protruding above the ground (usually 500 mm) are cut with a metal-cutting tool below the level. 4th stage - concrete is poured into the empty cavity of the pile. 5th stage - a head with a section of 200x200 mm with four holes along the edges of the platform is put on each pile, which are welded to the pipe by welding. 6th stage - a bar with a section of 200x200 mm is installed on the installed pile heads along the entire perimeter of the pile field, and fixed in the lower part of the head with bolts (capercaillie);
Base / plinth assembly: SIP panels are attached to the already installed timber. SIP panels are preliminarily cut to fit a specific format with the help of a wood-cutting tool, the width of which is 625 mm. The panels are fastened to each other using planed timber or a connecting element (the material is selected at the request of the customer). Fastening of SIP panels to the board is carried out using foam and galvanized self-tapping screws with a length of at least 45 mm;
Installation of walls: The walls are erected by analogy with the basement floor. SIP panels are installed on a ready-made basement of the first floor and are also attached to each other using a dry planed board using self-tapping screws and foam;
Roof installation and installation of window structures;
Exterior and interior decoration.

SipKanHouse LLC is pleased to offer customers a large number of ready-made projects, among which you can choose the best option. Thanks to this technology, our specialists implement any customer's ideas. At the request of the client, the height of the floors, the number and arrangement of windows, the purpose of the rooms can be changed at the stage of concluding a contract. For detailed information on the assembly of Canadian-type houses, the cost of services and other questions, check with the company's managers. We guarantee a multi-stage control system during the construction of buildings, ensuring the high quality of construction work. Modern techniques and equipment allow us to create comfortable housing that meets all safety requirements. Call the specialists of SipKanHouse LLC right now to get your dream home!

The Canadian technology for the construction of frame houses has recently become more and more popular in Russia. In Western countries, this type of house has been actively built for many decades. In Canada and the USA, using frame technology, houses and household objects began to be built back in the 30s.

Benefits of Canadian frame houses

Such construction has gained immense popularity due to its advantages:

The cheapness of building materials and the type of fasteners used.
Short construction time. The construction of an entire house from foundation to roof can take from a week to a month, after which it will be necessary to carry out engineering communications, complete finishing and bring furniture.
The construction of a frame can be done at any time of the year, regardless of the season and weather conditions.
There is no need to use heavy equipment or special vehicles when erecting a structure.
Frame technology allows you to build complex geometric structures, you can easily implement any design solutions and author's ideas.
The wall cake is very warm. The thermal insulation of the whole house is excellent, without having to overpay for the outer layer of insulation.
High level of sound insulation. Noise does not enter the rooms through the outer walls of the house from the street and through the floors.
The lightness of the whole structure of the house. There is no need for a massive foundation with great depth.
Great flight of imagination in external and internal decoration, the technology allows you to use any cladding options and types of finishing materials.
Electrical wiring and other communications can be hidden inside the walls.

Video with an overview of a typical American skeleton frame (house is 110 years old):

What are the main types of foundations used for Canadian frame houses?

The structure of the frame house is light and at the same time very strong due to the many stiffening ribs. Construction can be carried out on any type of soil - from rocky ground to sandy ground. Canadian technology for the construction of frame houses allows you to use any modern type of foundation for construction. The base can be: strip, columnar, monolithic foundation, columnar foundation with grillage or foundation on screw piles. Due to its low cost and good strength characteristics, the foundation is most often used on screw piles. Also popular is the so-called insulated Swedish plate.

Features of building a Canadian wireframe

The main elements of the frame house are wood and special slabs that sheathe the walls. Insulation is placed between the panels and frame posts. For the construction of such buildings, there is no need to use the services of lifting equipment or special vehicles.

The main stages of the technology of frame construction from edged boards (mainly 5 × 15 or 5 × 20 cm):

A platform is being assembled on the first floor for a wooden frame skeleton.
Walls are assembled on the platform in a horizontal position, which are then raised to a vertical position and placed on the lower harness along the foundation. The walls are aligned. The distance between the vertical posts along the axes is 60 cm - this distance makes it possible in the future to conveniently mount rigid insulation boards based on specially treated stone wool.
The resulting walls are connected by an upper strapping made of the same boards.
Depending on the number of storeys of the building, the interfloor overlap and the second floor are mounted, or a roof is built.

You can form a corner of the frame in two ways:

High bond strength, but there is a risk of corner freezing.

Strong enough connection, the corner is less prone to freezing.

The opening device for a door or window depends on the type of wall - load-bearing or non-load-bearing.

There are no large loads on the opening in a non-load-bearing wall, so you just need to assemble a box for fixing the interior decoration, it can be drywall, wood panels, OSB-plates.

A composite lintel of several boards should be installed above the opening under the door or window in the load-bearing wall. Its dimensions are determined during design, depending on the load and the width of the opening. Vertical plank posts are installed along the edges of the transverse lintel. It is advisable to take their number with a margin - four per opening.

To stabilize the entire structure of a frame house, jibs are used - boards measuring 2.5x10 cm or more. They are installed at an angle of 45-60 degrees to the vertical retaining posts; to achieve maximum rigidity, the jibs must be cut into the boards of the upper and lower strapping. Their main task is to resist lateral pressure on the walls, thereby preventing the entire frame structure from folding like a house of cards.

Interfloor floors or overlappings above the upper floor are made using all those planks. They are placed on the edge on the upper strapping with a pre-calculated distance from each other. If the area of the room is large and the length of the boards for the overlap is not enough or their sagging is possible, an intermediate support beam is installed.

The technology of building classic Canadian houses on the platform allows you to build a house in a maximum of one month.

It is best to use wood of coniferous species, with a high resin content, such wood resists moisture better, is not prone to rapid decay or the formation of fungus. The main requirement before starting construction is that the forest must be well dried. If the boards contain a lot of moisture, they will definitely be driven later, the whole frame of the house can be skewed. Sometimes the consequences can be dire, and the house will have to be rebuilt.

Advice:As soon as possible to carry out external finishing, so that the wooden structures do not have time to absorb moisture.OSB-Plates are more moisture resistant than plywood, but with prolonged exposure they are also susceptible to moisture.

What materials are used

When the frame of the future house is ready, it's time to make walls. OSB-plates, moisture-resistant plywood are used as wall materials. OSB-boards consist of wood chips glued together under a press, they are very dense and perfectly repel moisture. Moisture-resistant plywood is not inferior in strength characteristics to oriented strand board, but it tolerates moisture worse, with prolonged exposure its surface begins to warp. Plywood is a little more expensive than OSB board, so pressed boards are most often used.

Typical wall cake, insulation used

The Canadian technology for the construction of frame houses assumes a low cost per square meter and at the same time a very low thermal conductivity of the walls. Such a balance of price-strength-high thermal insulation is possible when using high-quality structural materials and modern heaters in construction. A typical cake of a wall of a frame house is as follows: external cladding, sheathing with OSB-plate, hydro-windproof membrane, insulation, vapor barrier layer, inner sheathing with OSB-plate, interior decoration. A very important element in this whole scheme is insulation, it depends on its quality and the thickness of the layer how long the house can keep the heat inside itself and how much energy is needed for heating. In classical frame construction, stone wool based on basalt fiber or ecowool is used.

Stone wool made from basalt fiber. Very low thermal conductivity, relatively cheap, easy to install, breathable. But it has one drawback - if the insulation technology is not followed or if it is exposed to moisture for a long time, it gets wet and completely loses its original thermal insulation properties.
Insulation based on cellulose, ecowool, light gray, 80% composed of recycled cellulose (paper), 12% of an antiseptic (boric acid), 8% of fire retardants (borax). All components of this material are non-toxic to the body. Ecowool perfectly retains heat in the house, does not rot, lets in steam, is able to withstand an open fire for a long time, is cheaper than basalt fiber. It is poured into the cavity or applied by spraying.

The most common roofing materials

Since the walls, roof frame and interfloor partitions of a frame house are quite light in comparison with cottages built using classical technologies, and the strength of a frame building is very high - at the request of the owner of the house, the roof can be built from any material: ceramic or polymer sand tiles. corrugated board, asbestos-cement sheet (slate), ondulin (bituminous corrugated sheet). The only requirement when choosing a roof covering is that the slope of the roof slope according to the construction project corresponds to the permissible angle of inclination of the roof from the material of interest. The cheapest option would be a profiled sheet roof, but the metal does not have good sound insulation. A roof made of bitumen-based materials, for example, ondulin (aka euro-slate) or polymer-sand tiles perfectly protects the upper floor from the sounds of rain, falling hail and wind. In frame housing construction using Canadian technology, a soft roof, on a bitumen basis, is often used. If you plan to make an attic or attic living space in the house, you need to think about good insulation, the material can be wall insulation that was used on the lower floor - stone wool or ecowool.

Video with a full cycle of construction of a frame house in Canada: