Real projects of houses made of foam blocks. Review of simple house designs made from foam concrete blocks

Scroll free projects houses made of foam blocks. Advantages. Peculiarities. Characteristics of foam block structures. Design cost.

Having decided on the choice of building material - foam block, it will not be superfluous to find out free designs of houses made of foam block. Below are free house designs. Projects of houses made of gas blocks, foam blocks, cinder blocks, silicate blocks. Project of a house with a garage of 150 sq. House project 10 by 10 with an attic made of foam blocks. Good project budget house for free. Chalet style house project. Project of an attic house made of foam blocks. Project of an attic house with a terrace.

What are the advantages of foam block houses. Projects with ground floor, attic and garage. What you need to know about designing a house. What is the cost of design and construction. What you need to pay attention to Special attention when designing. Features of aerated concrete buildings.

Projects of houses made of aerated blocks, foam blocks, cinder blocks, silicate blocks

Foam block and gas block are one group of building materials belonging to the so-called. lightweight concrete, and differ from each other exclusively in the formation of air cells inside the block itself. More about these building materials read our information articles.

House project with drawings for free: house project made of foam blocks 150

Total area of ​​the house: 138.8m2

Number of floors: two floors

Material: foam blocks

This is an individual two-story bay window house, which is distinguished by its layout and economical energy consumption.

Now it's time to consider appearance houses according to the project.

Exterior view of a house project made of foam blocks up to 150 with a bay window

The architect carefully calculated the proportions of the height, width and length of the exterior of the house, so that it seems completely small.

This may be what you are looking for!

The facing brick goes very well and beautifully with the smooth finish of the facades. The shapes and colors of the house design made from foam blocks look stylish and modern. You can easily give this house the highest score.

Internal layout of a house project made of foam blocks up to 150

According to the layout, the entrance to the house begins with a very original and beautiful porch; although it is not a terrace, it protects the house from precipitation. We open the door and find ourselves in the hallway room, where there is a closet for things. But the room itself is not separated from the living room by a door and there are no windows for sunlight.

The living room is spacious and well lit. The kitchen and dining room are also spacious.

There are some other advantages on the ground floor, there is a separate boiler room and a wardrobe, which is very nice and convenient. The house has a bedroom and a bathroom, which is located next to it.

Also, the layout on the second floor is located very conveniently. There are traditionally three bedrooms, two of which have their own personal wardrobe for things. And it will be possible to make a children's room in one of these rooms.

General impression of the project of a house made of foam blocks up to 150

This house project with a bay window made of up to 150 foam blocks can be called very worthy and modern. This project has no shortcomings - at least we haven’t found any.

Project of a house with a garage of 150 sq.m.: designs of houses up to 200 sq.m. m

That project fully meets all requirements, combining at the same time an attractive appearance, convenience, reliability and durability. Basically, such houses are designed for permanent residence of small families of three or four people.

Total area of ​​the house: 187.2 m2

Number of storeys: one floor and attic

Material: gas silicate blocks

Exterior view of a house project up to 200 sq. m.

This project is focused on construction using new materials.
The entrance to the house is lined according to the project face brick, and bassoon with a relief surface, and inserts in the form of blinds are used on the facades, which looks very beautiful and stylish.

For the appearance of this house project with a garage of up to 200 sq. m. we will give the highest rating.

Internal layout of house projects up to 200 sq. m.

This is perhaps the ideal layout.

At the entrance to the house, a walk-through hallway with space for a wardrobe awaits us. Next, a door leads to the built-in garage, where you can store your car and save extra space on the site, this is very convenient. Also, the built-in garage can also be used as a workshop or small warehouse.

The living room is very spacious, has access to the terrace, and has a passage to the kitchen-dining room. Next to the living room there is a staircase that leads to the second floor.

On the second floor according to the project of a house with a garage of 150 sq. m. There are three spacious bedrooms where you can put furniture and one large bathroom. Some rooms have a wardrobe for storing things.

General impression of the house project up to 200 sq. m.

This house project up to 200 sq m is very comfortable, compact and beautiful. It is designed for a small family.

» offers standard and ready-made projects of houses made of foam blocks on a turn-key basis. If you want to build cozy home, which will be reliable, safe, durable, then purchasing a ready-made project is the optimal solution that can save you a lot of time and money. And we are ready to provide everything you need to make your dream come true as soon as possible!

What do we offer

Here in the catalog you will find many different projects of houses made of foam blocks with layouts and photos:

• Private, country, country cottages
• Small houses and large mansions up to 1000 m2
• One-story, two-story, three-story
• With garage, with attic, with basement
• For several families

Why foam concrete? This material has many advantages: low price, environmental friendliness, high heat and sound insulation properties, light weight, smooth surface, ease of laying, processing, resistance to temperature changes. The use of foam concrete blocks can significantly increase the pace of construction and finishing works, reduce the total cost of construction of the construction project.

Compound

Working documentation usually includes the following sections

• Architectural – data about geometric parameters object, floor plan, facades, three-dimensional visual model;
• Structural - design features of the foundation, floors, stairs, roof;
• Engineering – data: drawings of heating systems (including thermal diagram of the boiler room), water supply and sewerage (sewage), as well as natural ventilation systems.

Projects include architectural and Constructive decisions, plans, diagrams, engineering drawings, electrical networks, satisfy state technical, fire safety, sanitary and hygienic, environmental requirements, developed taking into account all the requirements of the joint venture. Our prices for projects of houses made of foam blocks are affordable, documents are produced by courier in Moscow, the Moscow region, and throughout Russia.

A house made of foam blocks is an excellent choice, provided that the construction technology is followed. The erected structure will meet safety requirements and will become reliable and durable housing for the whole family. The material itself will not hit the budget and will allow construction to be completed in the shortest possible time.

If you have construction skills and free time, you can try to build with your own hands. You can entrust the matter to professionals who will provide a wide range of services: from choosing the best option in the catalog finished houses until complete completion of construction and finishing works. Below we will consider the nuances of independent construction.

Types of foam concrete

There are several characteristics of the material on which the construction process depends:

The density of foam concrete, which determines its purpose. It is designated by the letter D, next to which the number of kilograms per 1 cubic meter is written. m. material.

The structural block is characterized by high density (about 1-1.2 tons per cubic meter, D1000), structural and thermal insulation block (density ranges from 600 to 900 kg), thermal insulation (300-500 kg per cubic meter, designation D300).

Block type. Manufacturing technology makes it possible to obtain blocks of various sizes, with voids inside, with grooves and ridges, a special U-block for constructing a reinforced belt and lintels.

Block type. A second-grade block has chips and surface defects and may have irregular geometry. If masonry is carried out using cement mortar, unevenness is leveled by seams.

When glued, the block must have excellent geometry. A second-grade block can be used for the construction of outbuildings, for laying gables, where sawing is required.

The size of the cells in the structure of the material. The pattern is simple: the larger the cell sizes, the higher the thermal insulation properties, but the lower the strength.

Block storage conditions. Foam concrete is not afraid of high humidity, unlike aerated concrete. However, his specifications at high level humidity is still getting worse.

Color, which in the case of quality products should be uniform throughout the block.

Foam concrete house foundation

The construction of a house made of foam blocks begins with foundation work. The type of foundation is selected based on the intended structure and specific regional characteristics of the soil. For this purpose, geotechnical work is carried out.

When installing the most popular strip foundation are being implemented earthworks. The bottom of the resulting trench is strengthened, a sand cushion is placed on it, reinforcement is carried out, if necessary, formwork is installed and a concrete mixture is poured.

In hot weather, concrete requires periodic moistening. It will reach its nominal strength in 28 days under ideal conditions. Then it will be necessary to build a base, for example, from solid red brick, do waterproofing work and you can start laying the walls.

Walling

This stage implies knowledge of several essential aspects at once.

Secondly, you need to choose the right masonry adhesive. Some block manufacturers offer specific brands of glue, or even have their own branded glue. The technology of masonry work also needs to be clearly known.

You can also use ordinary cement-sand mortar, but it will create cold bridges in the wall, so glue is preferable. The choice depends on the skills of the installer, the thickness of the seam, financial opportunities developer.

All work must be carried out at an ambient temperature of at least +5°C. Professionals recommend using special tools: notched trowel, carriages of appropriate sizes.

Thirdly, the foam concrete masonry must be reinforced to avoid the subsequent formation of cracks. The first row of blocks, every 3-4 rows, all openings, installation sites for floor beams and the roof system’s Mauerlat are reinforced.

Reinforcement technology depends on the type of material used. This could be mesh or reinforcement. Let's consider the option with reinforcement. You can use fiberglass or steel reinforcement with a diameter of 6-8 mm.

Using a wall chaser, a small groove is cut on the block. Then it is thoroughly cleaned of block residues and dust. Then it is filled with glue into which the reinforcing bars are pressed. Excess glue is removed.

The distance from the edge of the block to the groove must be at least 6 cm; with a wall thickness of 200 mm, one groove is sufficient. If the thickness is greater, make two. The corners are made smooth so that the reinforcement does not bend almost at a right angle (this leads to disruption of its structure).

Despite the fact that foam concrete blocks are impressive in size, working with them is quite simple, especially if you have an assistant. The requirements for masonry made from this material are: special requirements, if you know them, you can provide yourself with a reliable and long-lasting residential building.

Flooring options for a foam concrete house

One of the features of foam concrete is fragility, since the material is sensitive to high and local pressure from any structures on it. In places where the load is particularly high (openings, rafter system, floors), the installation of a protective reinforcing belt is required.

The latter allows you to distribute the local load over the entire length of the walls. The belt can be made of concrete by pouring it into pre-prepared formwork with reinforcement. Or use U-blocks designed for this purpose, which, among other things, reduce the heat loss of the structure.

As a material for floors one-story houses Wooden beams are often used; for two-story houses and houses with an attic, hollow reinforced concrete slabs are used.

Roof installation

The installation of the roof of a house built from foam concrete blocks takes place in several stages and does not differ fundamentally from a similar process for houses made of other materials. The nuances of the work will depend on the type of roofing structure chosen.

The roof can be pitched. The original version, which not long ago was used exclusively for outbuildings such as garages, sheds, etc.

The gable roof will become the best option For country houses from foam blocks. Hip and attic options are good for houses with year-round use.

Insulation of a house made of foam blocks

Some projects of houses made of foam blocks do not involve insulation work. Construction is often carried out using D600 brand block, which has excellent structural and thermal insulation characteristics.

However, the need for insulation may still arise. Then it is more expedient to use vapor-permeable heat-insulating materials, since foam concrete is a “breathing” element. Among them, first of all, it is worth noting mineral wool, produced in the form of slabs and rolls.

When choosing a specific option, you must be guided by the principle: the vapor permeability of the insulation should be equal to or greater than that of the wall block.

Exterior finishing

There are several options for finishing foam block houses:

• brick cladding;
• installation of vinyl or metal siding;
• installation of lining;
• decorative plastering.

The external decoration of the facade gives the entire house an aesthetic appearance. In addition, it allows you to hide all the unevenness of the masonry itself and provide additional protection from the cold.

The main requirement for the arrangement of facades is to ensure proper ventilation. Therefore, special structures called ventilated facades are installed. Or decorative plaster specialized for foam blocks is used.

At the final stage, do not forget to take a photo of your own house made of foam blocks and add it to the collection of beautiful “brainchildren” of high-quality construction.

Foam block is actively gaining popularity among building materials. And this is not surprising: using it, you can build a durable, comfortable and beautiful cottage relatively cheaply.

The SVOD-STROY company offers a choice of several dozen finished projects houses made of foam blocks on a turnkey basis.

What are these cottages good for?

Foam blocks are produced on the basis of sand, cement and foaming agent. They are light, with a porous structure, which provides a number of advantages:

1. Durability. The peculiarity of foam concrete blocks is that over time they gain strength.
2. Low thermal conductivity. The porous structure provides optimal thermal insulation.
3. Resistant to moisture and fire. Foam blocks do not absorb water well and do not support combustion. Such a cottage will be weather-resistant and as safe as possible.
4. Ecological cleanliness. Only natural ingredients are used to make foam blocks.
5. High speed of construction. Building a house from foam blocks takes less time than a brick one, with the same number of squares.
6. The ability to implement any engineering and design ideas. This material is highly processable: if necessary, the block can be sawed, drilled and sanded to perfect your foam block house project.
7. Relatively low price. Despite the fact that the foam concrete block itself is more expensive than brick, it covers significantly large area, why it is shrinking total cost. In addition, houses made of this material do not require additional insulation, which allows you to implement projects of houses made of foam blocks with even greater benefits.

Let's build the cottage of your dreams

Ready to buy your own foam block house, but can't find the right one? We will build it for you! The catalog of the SVOD-STROY company contains dozens of turnkey projects of houses made of foam blocks: excellent ready-made options, relatively inexpensive even with an impressive area.

In addition, we can develop for you an individual project for a house made of foam blocks.

Prices depend on the options you choose. To calculate how much it will cost to implement a house project made of foam blocks, there is a calculator on the website.

Entrust the development of a house project made of foam blocks to the company "SVOD-STROY"

We have been designing cottages for many years permanent residence and in our work we combine centuries of experience with modern technologies. Specialists of the SVOD-STROY company successfully implement projects of houses made of foam blocks in Moscow or the Moscow region - with high quality and inexpensively.

Photos of the process of building houses from foam blocks in the Moscow region can be found in the “Gallery” section.

The Dachny Season company builds turnkey houses from foam blocks in Moscow and the Moscow region according to ready-made and individual projects. IN short time We build warm, reliable and durable buildings. Minimum term The lifespan of a cottage is 70-80 years, and with strict adherence to construction technology, the house will last for more than a century.

Construction Features

Foam block is a molded cellular concrete made from a mixture of sand, cement and water with the addition of a foaming agent. It has a homogeneous porous structure with closed pores isolated from each other. Thanks to this, the material has thermal conductivity and vapor permeability that are not inferior to natural wood. Foam block houses “breathe” and independently regulate the humidity in the room, maintaining a comfortable microclimate. They are lightweight, rodent and insect resistant, fire resistant and compatible with any indoor or outdoor finishing materials. Over the years, the strength of foam concrete only increases.

Advantages of building houses from foam blocks:

• Fast construction time (from 70 days),
• Mechanical strength, load resistance,
• High thermal insulation and noise absorption,
• No shrinkage,
• Vapor permeability
• Reliability and durability.

One of the main advantages of foam block houses is cost. They do not require a strong foundation and the use of expensive special equipment, and do not require additional thermal insulation. The material is easy to process: it can be grooved, sawed, milled, giving it the desired shape. This allows you to implement any architectural and design solutions.

Order a foam block house from the Dachny Season company

Our website presents projects of houses made of foam blocks, developed by specialists of the Dachny Season company. For each of them there are drawings, photos of already constructed objects, as well as detailed description works in three available configurations: “Basic”, “Optimal” and “Turnkey”. Additionally, you can order façade and interior finishing work, installation of gutters, lining the roof with soffits, installation of interior doors and laying of internal doors. engineering systems. Prices in the catalog do not include porches, terraces and balconies.

Advantages of ordering a house from the Dachny Season company:

• 15 years of work in the field low-rise construction,
• over 2500 completed projects,
• internal redevelopment - FREE,
• timber from the direct manufacturer,
• staged payment - 1% - 14% - 20% - 20% - 20% - 20% - 5%,
• 940 ready-made projects ranging from 60 to 500 m2,
• free delivery of materials within 100 km from the Moscow Ring Road,
• technical Supervision at all stages,
• guarantee period- 7 years.

"Dachny Season" is a full service company. On your own We carry out the full range of work - from preparation project documentation before garbage removal and commissioning of the facility. You can also order from us individual design buildings to suit your requirements or inexpensively buy a house project made of foam blocks without performing construction work.