Land state register map. Public cadastral map of land plots

Progress boldly rushed forward. If earlier, in order to get information about an exciting object, you had to go to a specialized structure, stand in line to find out the required information, today everything has become much easier. From now on, the public cadastral map of the Russian Federation has become available to all citizens of Russia, which is available on our resource online.

public cadastral map from satellite 2018 is a valuable intellectual software product that was developed by the government's state mapping service. It operates online. Since the card does not contain any confidential information, any Internet user can access it.

What exactly can be learned by using this software product?

A public cadastral map from a satellite allows a citizen to see:

Districts of the official cadastre, into which the entire virtual car is schematically divided. Usually their boundaries reflect the boundaries of the territorial units of the Russian Federation.
Cadastral regions. Often they coincide with the boundaries of settlements and districts that exist today, although there are exceptions.
Cadastral quarters. This concept is understood as parts of the map that correspond to the boundaries of cities, as well as small rural settlements, gardens, forests.
Cadastral areas. They are understood as the smallest parts that act as an integral element of the cadastre. They make a delimitation of the lands of citizens-shareholders of garden partnerships (those located near residential buildings). Some are a display of the location of the streets of a particular village.

A cadastral public special map is needed today not only by owners of residential properties, but also by lawyers, realtors, surveyors. It is with the help of this software product that the categories of persons mentioned above get the opportunity to obtain the information necessary for their activities in a completely free mode.

The need to study the cadastral map arises when it is necessary to clarify the data on the cadastral special number assigned to the site. Also, the map will help to clarify the exact location of the land allotment, its configuration features. The map of our special service will also help determine which district (or district) a particular piece of land belongs to. A map is also required for surveying real estate objects.

What other important data will help to get an interactive public map of our resource?

Our interactive software product, which reflects all the information from the state cadastre, will also help you to know:

the legal official status of the allotment;
object location address;
exact area;
exact cadastral price of real estate;
the exact date when the site of interest to the user was entered in the official register;
the form of ownership of the object under study, which was assigned to the right holder.

Without these data, it will be impossible to draw up a cadastral passport and other papers for a land allotment. Information from the interactive cartographic software product, which was surveyed in satellite mode, is also used in the formation of an official extract from the USRN.

Why should you use our resource?

Our resource offers a public cadastral map with all the relevant information received online from Rosreestr. A convenient navigation component will help you quickly navigate and find out the moment of interest using the map. In addition to an interactive cartographic product, on our resource you can always order an extract from the USRN and USRR for any object. It is advantageous to order certificates from us for five reasons. We:

we provide information from Rosreestr, so we always offer only up-to-date information;
promptly quickly sent to the client's mail or to his Personal Area ordered extract;
we confirm the authenticity of the document sent to the client with an electronic digital signature;
we provide services for obtaining certificates at the lowest possible prices;
we immediately notify the client about the readiness of the document required by him.

Our service has already been used by tens of thousands of customers. Use our multifunctional portal and you!

Order documents

In order for the map to open, in the upper right corner, click allow blocked content!

most efficient and fast way obtaining information about immovable objects of the Moscow region is a public cadastral map. It is available to any interested person. Most often, she is approached by specialists in the sale of real estate, representatives of legal and construction organizations. Convenient search by interactive map Podmoskovye allows you to instantly find information on any object.

The public cadastral map is unique software product developed by Rosreestr. It is online around the clock and can be studied by every Internet user.

What can be learned with the help of the map and what information does it contain

All territories of our vast country are divided into cadastral districts. Their borders coincide with the borders of the administrative territories of Russia. Then they are divided into districts, quarters. The smallest unit of the cadastre is the plot.

Referring to the cadastral map of the Moscow region, you can find out the following information about those objects that have passed the cadastral registration:

cadastral number and address of the property of interest,
the area that was fixed at the time of registration with the cadastral authority,
value according to the cadastral valuation,
date of registration of the object and form of ownership,
the status of the land.

The listed information is important when carrying out a transaction for the purchase, lease or sale of a real estate object in the Moscow region. These data are required for the preparation of a cadastral passport and other documents for a land allotment.

How to use the cadastral map

There is a public cadastral map of the Moscow region on the general resource of Rosreestr. by the most in a simple way find on it the plot of land or building of interest - know its cadastral number and enter it in the search field.

After the system finds the desired element, it will automatically display it on the map. The number contains an indication of the county, district and block where the territory of the site we are looking for is located.

If the exact number is not known, then you can find the object on the interactive map by address or visually. For the required territory, general information will be displayed indicating the number of quarters and objects. For each object, belonging to a particular cadastral district is indicated (this is important information for those objects that are located on the border of the Moscow region).

Each object on public map The suburbs are quite easily distinguishable due to the high detail. Dense building blocks do not interfere with seeing each building. Qualitative detailing and topography make it possible to find and determine the cadastral boundaries of the plots of the region and nearby territories.

Possibilities of the cadastral map of the Moscow region

The public cadastral map of the Moscow region is an open resource and is available to any user. Here you can find legal information on land plots, as well as other immovable objects Russian Federation.

The relevance and availability of information on the map makes it possible to track the latest data on the property of interest. A cadastral map is in great demand to clarify information about a particular land plot or property. Visually, you can determine its contours, boundaries and configuration, as well as find out general information. On the map it is easy to clarify the belonging of the site to the district, district. If the site is not found, then it has not passed the cadastral registration and is not plotted on an interactive map.

Often, the data on the property of interest in the Moscow region, contained in the public cadastral map, is enough. After all, there is general information, which are in the USRN. However, they in the map are only informative and have no legal force. To obtain an official document, you need to request an extract from the USRN.

The simplicity and accessibility of the resource of the public cadastral map of the Moscow region made it popular not only among professionals associated with the real estate and construction market, but also among ordinary citizens.

Information from Rosreestr

Click on the map for any land plot

Land plots located on the territory of the Russian Federation must be in government bodies. In addition, their objects are subject to accounting. Before registration, it is carried out, its cost is determined, an individual number is assigned. These data are entered into the public map of Rosreestr. Finding a plot by cadastral number is very simple.
Cadastral number - individual characteristic land plot presented in digital form. It is unique, that is, it cannot be re-assigned to another territorial unit. In this regard, the search for a specific object is greatly facilitated.

To find a land plot, knowing the cadastral number, it is easier to use the services of the Internet. It contains public maps with advanced features. They can be used online. It is enough for the user to indicate the required number, and the system will automatically find the land plot and provide all the data on it.

The second option is to contact Rosreestr in person. Such information is not secret, it is available for review to all who are interested in it. If you make a request to Rosreestr, they will provide information in the form of a cadastral plan, passport or extract. in 5 minutes you can quickly and urgently order from us.

Thus, the easiest way to obtain information about a land allotment is to find a plot by cadastral number. , for example, like other territorial units, it is divided into districts and quarters, which are assigned an individual number. On a public map it is easy to navigate, find out the location land plots, their boundaries. You can even get acquainted with the pictures that were taken from space.

It is worth giving a small example. Let's say you need to find a city. Its cadastral number is 50:62. If you enter these numbers in a special field, the map will display information that relates to this city. It should be noted that the number 50 is general meaning for the cities of the Moscow region. A 62 is the individual number of Bronnits.

Thus, finding a plot by cadastral number is as easy as shelling pears. Knowing a few numbers, everyone will be able to get detailed, up-to-date and reliable information about the land plot of interest to him. If the data changes, they must be entered into the documents.

The public cadastral map of Rosreestr is a convenient and easy-to-use online tool. It enables any resident of Russia to obtain information stored in the state register of real estate and land cadastre. The map is a public resource, information that does not contradict the law on personal data is available to absolutely any user, from anywhere in the world, without registration.

The public cadastral map of Rosreestr contains all the objects that are included in the geocadastre and for which the surveying procedure has been carried out. The information is current and updated at regular intervals. The latest data on the object can be obtained by ordering a certificate or extract through the services of Rosreestr.

Information from this resource is used not only by ordinary citizens. She is often referred to by municipal services, courts, banking organizations, insurance and real estate companies. The cadastral map is also used in their work by cartographic services, in particular, geodetic services, since the geodetic base of the country and topographic information are plotted on the map.

Not every resident of Russia still knows that such a resource exists and, moreover, how to use it. Therefore, information about what the public cadastral map of Rosreestr is, what services can be obtained using its resources, how to manage the interface, will not be superfluous at all. To start using the card, just follow the link of the same name on the services page of the official portal of Rosreestr.

Purpose of the public cadastral map

Public cadastral map of Rosreestr

The Rosreestr card is used by individuals, state companies, authorities and law enforcement agencies, commercial organizations. Most often, they turn to her when it is necessary to make a real estate transaction, draw up documents for land, or urgently receive information about a separate land plot. Among the most common reasons why the public cadastral map of Rosreestr is used are:

With the help of a public cadastral map, the user at any convenient time, regardless of his location, employment, etc., will be able to find out the information he needs, stored in Rosreestr. It is completely free, and all you need to work is the Internet and a computerized device (phone, tablet).

For example, if a user who plans to buy land in a region has entered the portal, he should pay attention to the cadastral value of the plots. For land shares located even in the same block, this cost may vary depending on the area of the site, land category and other features. The cadastral value necessarily appears in the documents for land and real estate and is the basis for calculating taxation when making a transaction of sale, donation, inheritance. In addition, it is also taken into account when calculating the annual property tax. Naturally, the lower the price, the lower the tax, that is, it is more profitable to buy inexpensive plots. On the other hand, the cheapest plots of land have such a cadastral value for a reason and are not a good purchase in terms of prospects for use or comfortable living. Therefore, the buyer must strike a balance.

Or another example. The citizen bought the land, built a house on it and moved the whole family. And in a couple of years, a residential complex of a plant or a factory grows nearby. And if he had looked at the purpose of the land on the cadastral map of Rosreestr before buying, he would have seen that there is industrial land nearby or intended for development.

Possibilities of the cadastral map of Rosreestr

The main opportunity provided by the public cadastral map of Rosreestr is, of course, versatile information from the category:

cadastral division of the territory of the Russian Federation;
the shape and size of free plots of land;
purpose of lands and types of their permitted use for land plots in Russia;
topographic and geodetic basis of the map of the Russian Federation, etc.

With the help of the public cadastral map of Rosreestr, you can:

check the data on any piece of land - where it is located, what form of ownership it has, by whom it is entered in the register, etc .;
find a free plot of land with suitable parameters (price, area, location) for purchase or rent;
get extended information.

The last point is the so-called public cadastral map services, which are provided through the Rosreestr services section. By card order:

certificate of real estate on the site;
extract from the State Property Committee;
an extract from the State Register of Rights to Real Estate.

Such help is useful when you need to get the most up-to-date information on an object (in case the web application has not yet been updated to the latest version), get more information than is provided on the resource site in text format, or get this information right now.

Registration of statements and certificates is available after authorization. An extended extract (certificate) is provided online exclusively to the owner of the land plot or his representative, as it contains personal data. In other cases, a regular certificate (extract) is ordered.

Any document that is printed from electronic service, does not have a wet seal, so it must be certified if you plan to refer to it in municipal bodies or in court.

Interface of the public cadastral map of Rosreestr

The basis is the map of the Russian Federation. On the portal of the cadastral map, it is divided into sections according to the cadastral division:

regions-subjects of the Russian Federation - along the borders they coincide with the administrative-territorial division;
cadastral districts - as a rule, correspond to districts or regions;
cadastral quarters;
plots.

Symbols and appearance of the public cadastral map of Rosreestr

It will be easy for users to navigate the map, as its interface resembles an ordinary administrative or topographic map of Russia. By default, only some objects are applied to it:

boundaries of plots in the form of red lines;
water bodies marked in blue and duly signed;
plantations, colored green and labeled accordingly;
names of settlements;
lot numbers.

The conventional signs adopted on the public cadastral map of Rosreestr correspond to the topographic and geodetic designations approved by GOST. If a satellite image is used as a map substrate, it is a photograph where the purpose and nature of objects are understandable intuitively.

In the course of work, the user can modify the public cadastral map of Rosreestr and add other objects to it:

additional borders;
forestries, forest parks;
special economic zones.

Thanks to this property, users at any time can receive visual extended information that will allow them to resolve the issue with which they applied to the service, faster and more efficiently.

What can you do with the card?

The public cadastral map of Rosreestr is an interactive resource. Therefore, it is easy to deal with it. Using the map, it can be zoomed in and out, for which site visitors can use three mechanisms:

computer mouse wheel;
zoom in and out buttons;
combination of keys "Ctrl" + "+" and "Ctrl" + "-" on the computer keyboard.

In addition, the map can be moved around the screen to access one or another part of it. To do this, you need to “hold” the image with the left mouse button and move it. The functionality also allows you to simultaneously move and zoom. This action is carried out by double-clicking the left button of the computer mouse in the area of interest on the map. In this case, the scale is chosen by the system independently, taking into account the diagonal of the user's monitor.

If the map is viewed from a smartphone or tablet, control is realized through the gestures accepted on the device.

Map menu

The menu of the public cadastral map of Rosreestr is located on the left side of the screen. In a collapsed form, it is a visual pictogram. Intuitive images and tooltips will not let you get confused even by a user who is on the site for the first time. The main sections of the menu:

search - finds objects by their characteristics (cadastral number, address, coordinates), and in the search results, you can open the information window and view the available information about the land from Rosreestr;
objects at a point – opens a window of information about a land plot from state registers by clicking on it;
map management - shows additional objects on the map (you can add or remove boundaries, a geodetic base, territorial zones, buildings, roads and other objects on the map), the item "Thematic maps" "paints" the territory in conditional colors according to a certain parameter (cadastral value, purpose of land, etc.);
drawing - allows you to draw your own sections and other objects of various geometric shapes (points, lines, polygons) on the map, creating your own sketches for further use;
measurements - measures the distance between objects on the map, the area and perimeters of the territory, both already marked and previously drawn with your own hands;
favorites - sections marked with an asterisk can be downloaded as an excel file;
map printing - selects a map area for printing to a printer (borders can be changed);
reference information - provides information from the PPC, instructions for using the map, as well as copyright and information for developers;
feedback - creates a form with which you can ask your questions, leave a complaint or comment (authorization is required).

How to use the public cadastral map of Rosreestr?

To start using the cadastral map of Rosreestr, you do not need to register or perform other actions. It is enough just to go to the website of Rosreestr in the services section and follow the link "Public cadastral map". Using the card is completely free.

To perform actions on the map and get public services menu and navigation buttons are used.

How to search for information on the map?

The first most frequent action that almost all guests of a web resource perform is the search for a land plot. It can be done in several ways.

Land plots on the map

The easiest option is when you already have cadastral passport object, that is, its cadastral number is known. Simply enter it in the search bar and click the "Find" button next to it or the Enter key on your keyboard. The public cadastral map will zoom in and center itself on the screen so that the area of interest is in the center.

Similarly, the search for a land share is carried out if the cadastral number is unknown, but there are coordinates of the object.

Lot search by county

If neither one nor the other is available, you will have to look for the address. In this case, data is entered into the search string in the following sequence: subject of the federation, region, district, city (town, village). In the results of the issuance, you can see a different number of sites, you need to click on the one of interest.

The most inconvenient option is if you only know approximately where the land is located. Then you will have to go to the desired quarter and look for an object by external signs, zooming in and sequentially examining parts of the map. For clarity, it will be useful to add a substrate to the cadastral map - satellite images of the territory (menu "Map Management").

Another way to find out information about a land share is to click on it using the "Objects in Point" menu. A pop-up window will appear under the cursor with text information, links and a public services tab.

Opposite the sites in the search results, there are 2 icons - an asterisk and an exclamation mark. The first is used to add an object to favorites, and the second is used to complain about incorrectly displayed information.

Viewing general information

As soon as the user has selected a certain land plot on the cadastral map of Rosreestr, a window appears to the left (or next to the cursor), where all the data of interest to him are collected.

The appearance of the window consists of two tabs - informational and with services. The first one reads:

cadastral number of the site and the quarter to which it belongs;
the physical address of the object;
the exact area of the site;
cadastral value of the site;
assignment of lands;
type of permitted land use;
date of entering information into the cadastre;
date of making changes to the cadastre;
Name of the engineer who worked on the site.

This data allows land owners to control information about their property, and for those who only want to purchase a plot, choose the most suitable option. In addition, information helps owners (current and future) to protect themselves from fraudulent transactions, land squatting, improper taxation, etc. The cadastral number unambiguously refers the object to one or another local authority of Rosreestr, where the owner of real estate or land needs to apply for paperwork.

a certificate from the State Register of real estate located on the site;
extract from the State Property Committee;
extract from the EGRP.

As a rule, they are needed when drawing up documents for land and real estate, mortgages, insurance, in litigation. On click, the system will redirect the applicant to the Rosreestr website to the services section, where it will be necessary to fill out a special form.

To the right of the requests form, the user will see a menu that contains all the services that Rosreestr provides online - certificates, extracts, requests, etc. Here, in the services section, you can track the implementation of your application.

plan KK - a plan of the cadastral quarter, where the site is shown in the land surveying system of its region;
KU plan - plan cadastral plot, is a callout from the cadastral map, where the site is shown on a scale, with boundaries and orientation to the cardinal points corresponding to the map;
search by cadastral quarter – finds parcels within a quarter.

The QC and KU plan are displayed in a separate tab (window) in the form of a plan that can be saved to electronic media (hard disk, flash drive) in one of two graphic formats.

In the header of the information window, the cadastral number of the site and its address are displayed.

How to take measurements?

measurements

The functionality of the cadastral map of Rosreestr allows you to make measurements on it. The user can measure the distance between points, from a point to an object, the area and perimeter of the outlined territory. Calculations are made automatically by the system, the results are displayed immediately under the cursor as a distance in meters or an area in square meters.

To measure objects, you should refer to the "Measurements" menu.

How to save information about the site?

All data, both graphic and textual, can be saved to your computer.

In addition, users can save for themselves links to areas of interest to the map. To do this, use the compact menu on the right side of the screen (bottom). It makes it possible to get a link to an object for copying, posting on a blog, and also sharing it on popular social networks.

Seal of a section of the public cadastral map of Rosreestr

Map printing

The public cadastral map of Rosreestr allows you to print any of your plots to the printer. Steps for printing a land share:

go to the "Print" menu;
select the sheet format (A3 or A4);
specify the scale in the drop-down list (scales according to GOSTs);
specify the orientation of the sheet for printing (landscape or portrait);
if necessary, adjust the location of the print area marked with a green rectangle, moving it to the desired location;
issue a print command.

The system provides for adding a comment to the picture, the date of printing is set automatically.

Useful properties of the public cadastral map of Rosreestr

It's always good to know the hidden features of a resource. The public cadastral map of Rosreestr is no exception. There are a number of features that will make it easier and easier to work with the resource, as well as help you learn more about the site.

Search for the exact address of an object on the public cadastral map of Rosreestr

Using the search, it is easy to find out the address of any site and property on the cadastral map. To do this, the user needs to select the “Address” object in the drop-down filter of the search bar, and then click on the object of interest on the map.

Adding your own object to the cadastral map

You can add your own objects to the public cadastral map, for example, plots that are planned to be rented or purchased, real estate objects, etc. to do this, you need to generate a file in csv format, where you specify the characteristics of the object in the form of a table. Then the user must go to the "Favorites" tab and upload the file to the "Public Cadastral Map" web application of Rosreestr.

How to find the coordinates of the site by cadastral number?

Sometimes there is a situation when the cadastral number of the plot is known, but its coordinates are not. If you want to know them, the user must do the following:

enter the cadastral number in the search bar (by setting the filter "Plots");
click on the result of the search results, thereby selecting a site on the cadastral map;
look at the search bar - it will indicate the geographical coordinates of the object.

Sorting plots by cadastral value

The Map Management menu is very useful, although it doesn't seem like it at first glance.

Map Management

Of particular interest to users is the section of thematic maps. It helps to visualize the information contained on the map using different colors. Thematic maps available:

by cadastral value (total or per square meter);
according to the purpose of the land;
by type of permitted land use;
by form of ownership;
by date of entry.

Thus, the service provides a tool with which it is easy to find cheaper land, check its purpose, when it was occupied, etc. For example, if you buy or rent a site with a lower cost than those that are nearby, you can save a lot on its taxation. And paying attention to the purpose of neighboring lands, we can assume that there will be some time later: another private house, high-rise building or production.

Pre-purchase site inspection

By checking the land plot before buying or renting it using a public cadastral map and Rosrestr, the user protects himself from fraudulent activities, as well as problems and troubles in the future. If there are plans to make a deal with a specific site, you should find it on a public cadastral map and see:

To get the most up-to-date information on the land plot, it is recommended to order certificates and extracts from Rosreestr, which always reflects the latest information. When buying land, it is advisable to ask the owner to get such a certificate in an expanded version, and for greater reliability - with a wet seal. Such a certificate will necessarily indicate all owners, encumbrances, etc.

How and why to order an extract from the State Property Committee and the USRR?

It should be immediately recalled that using the public cadastral map of Rosreestr, you can only order an electronic version of extracts. This option is suitable if you do not need to provide an extract to state, judicial, law enforcement agencies, to a bank, but you just need to make sure that the data is up-to-date. For example, such a certificate can be ordered when selling real estate in order to show it to the buyer or to check whether the property is “clean”.

The extract indicates such data as the name and surname of the owner, type of ownership, characteristics of the object, when and by whom the rights to the object were registered and when changes were made. In addition, the extract indicates if the land or real estate is arrested, encumbered, or undergoing arbitration or court cases, as well as whether this happened in the past and how many times.

Through Rosreestr, you can order both urgent and non-urgent, as well as a short and extended version of the extract. The latter option is available only to legal owners or their representatives, as it contains personal information protected by personal data law.

To order an extract from the State Property Committee and the USRR, just follow the appropriate link on the "Services" tab of the public cadastral map, and the system will redirect the user to the Rosreestr portal. In the window that opens, fill out the information request form and indicate in what form it should be issued. An electronic statement is provided online and free of charge as a link to an online document. A paper statement is received at the territorial office of Rosreestr, which serves the site or property, at the MFC or by mail. You will have to pay a state fee for a paper statement.