Project of a one-storey house with the letter g with a terrace. L-shaped houses - projects with the letter G

The primary task that the owners face even before the construction of the house is the choice of a place for it on the site. There is a basic rule: the corner of the house should be located in the northern part, then it will be possible to organize a cozy patio, protected from the wind.
In the courtyard, you can build a terrace, which visually "completes" the house to a rectangular or square shape.
In the project of L-shaped houses, their wings can be either the same in area and length, or different. By the way, if 2 families or several generations of the same family live in the house, then it would be correct to make 2 independent entrances.
House project with the letter G allows you to build a garage as harmoniously as possible, having a common wall with it and, accordingly, an entrance. Imagine how comfortable it is to unload purchases or just come home, bypassing the bad weather outside. The garage can be connected to the communal heating system, which will reduce costs compared to if you had to heat a detached garage.
A house project can be created in such a way as to distance a noisy area, such as a playroom or children's room, from a quiet area, such as a library or study. Thus, everyone will be able to get along peacefully, and no one will interfere and annoy anyone.
As a rule, a house project with the letter G does not provide for the construction of a second floor, so it does not require an impressive foundation. This way you can save on it. However, if you wish, it is possible to design both an attic and a two-story building - on this page you will find such projects.

Competent layout in houses with the letter G

In addition to separating noisy and quiet zones, it should be remembered that technical rooms should be provided in a private house, for example, for a boiler room or a storeroom. And wet areas where the bathroom or sauna is located should be isolated. The boiler room should be located on the basement floor, so hot water and heat will be evenly distributed throughout the house. If your house is made of wood or wood-based materials, then the boiler room should be treated with anti-flammable agents.
If you have a two-story house, then a bathtub with a toilet bowl can be located both on the first and on the second floor. This point should also be taken into account when ordering a standard or individual project of an L-shaped house.

Any architectural and construction project consists of three parts: architectural, design and engineering. This is a document without which the developer will not receive permission to start construction.

The main part of the project is the architectural and design sections. If the customer is sure that there are intelligent specialists in engineering networks in the construction team, then the development of this part of the project in a specialized company can be abandoned. But you need to understand that the architect, designer and engineer are working on the project together and such moments as, for example, grooves and openings in the walls for laying pipes and wires, are provided by them in advance.

The engineering part of the project is divided into several parts

  • Water supply and sewerage (VK)
  1. water supply scheme
  2. sewerage scheme
  3. general view of the system.

Before proceeding with the design, it is necessary to decide what kind of communication will be - individual or connected to a centralized system.

Individual water supply gives complete independence from external conditions. But it must be remembered that you will need your own water sources, and drilling a well will cost a decent amount.

Connecting to a centralized system will require the development of the project in accordance with the technical specifications of the existing network and obtaining permission for the tie-in.

When connecting the sewage system to a centralized system, the procedure is the same as when connecting the water supply: filling out a request to the relevant services, developing a project, obtaining permission to insert into the system. If you decide to organize an individual sewer system, then from time to time you will have to invite a sewer service.

  • Heating and ventilation (RH)
  1. heating scheme: calculation of the required power of equipment, distribution schemes of heating mains, location of pipes and radiators
  2. ventilation scheme: connection to power electrical equipment, ventilation communications and shafts, gangways and, if necessary, the location of stoves and fireplaces
  3. boiler piping (if necessary)
  4. general instructions and recommendations for the section.

If the ventilation system is always an individual design, then heating can be either individual (stove, air, water, electric) or connected to centralized networks.

  • Power supply (ETR)
  1. lighting layout
  2. distribution of power networks
  3. ASU scheme
  4. grounding system
  5. detailed description and characteristics of all elements of the system.

Electrical systems can be categorized as mandatory and optional. The obligatory ones include indoor and outdoor lighting, ventilation, air conditioning and electric heating systems. Additional systems include "Warm floor" or automated gate control.

IMPORTANT

  • Each of the parts of the engineering section of the project should contain general and technical descriptions, specifications of materials and necessary equipment.
  • Drawings of elements of all systems and floor electrical wiring are carried out on a scale of 1: 100.

Price: from 300 rubles. per m²

Package "Engineering networks"

Package "Engineering networks"

The project of utilities will make it possible to competently lay communications and make the house truly comfortable and modern.

  • Price: from 300 rubles. per m²

Making changes to the project

Often the question arises before the customer: choose a standard house project and save money, while losing on the originality of future housing, or order an individual project, but for a lot of money.

Our company offers a compromise option. You order a standard project, and we make changes to it, taking into account all your wishes as much as possible. Of course, this implies additional costs, but, in any case, such a project will cost much less than work for a specific order. And we will take care of making your house look original.

You can make the following changes to the house project:

move wall partitions. But only if they are not carriers. Such an operation will allow you to change the size and purpose of the rooms.

the transfer of window and door openings will allow you to change the illumination of rooms and organize convenient access to the rooms you need

changing the type of floors and walls will allow you to fully realize your own ideas about economical and rational housing

change the height of the ceilings. Although all our houses are designed with an optimal room height of 2.8 m, some customers believe that high ceilings are additional coziness and comfort.

converting the attic into a living space will give you the opportunity to expand your own living space

it is worth changing the angle of inclination of the roof and sheds taking into account the climatic conditions of a particular region

it is necessary to change the type of foundation, taking into account the engineering and geological parameters of the soil. It is also possible to add or change a basement or basement.

you can add, remove, change a garage or a terrace, in accordance with your ideas about the functionality of housing

changes in the structural composition, building and finishing materials will allow you to economically dispose of your own financial resources

the project in a mirror image will organically fit the house into the surrounding landscape.

The changes made should not affect the safety of the home.

Too many changes usually do not improve the design. If you could not choose a suitable house in the catalogs, then it may be worth ordering an individual project housing from an architect.

Price: from 2000 rubles.

Making changes to the project

Making changes to the project

A house built according to a standard design may look original

  • Price: from 2,000 rubles.

BIMx model

We keep up with the times and today we offer you the opportunity to receive, along with the project documentation Bimx model - based on technology that provides simultaneous navigation through 2D documentation and 3D building models.

Now you can "twist, walk inside, see your future House from all sides" View all sizes and heights, specifications of openings, etc. You will receive a file that will be your reliable, convenient assistant for construction control.

* You receive the file electronically and use it using the BIMX application on Apple and Android mobile devices

The BIMX app is available for free in the Play Market, App store

Demonstration BiMx

BIMx model

BIMx model

BIMx model - interactive viewing of a three-dimensional model of your house. Now you can "twist, walk inside, see your future Home from all sides"

  • Price RUB 10,500

Foundation Adaptation Package

When a typical house project is being developed, some averaged soil parameters are taken as a basis. But, without having accurate data from geological expertise, it is difficult to take into account all the nuances in the design. Therefore, often the geotechnical characteristics of a real site differ significantly from those originally laid down in the project. This means that the foundation - the foundation of the whole house - will need to be improved in order for it to be strong and reliable.

In order to completely eliminate all problems when laying the foundation, the specialists of our company have developed the "Foundation adaptation" package. When implementing the package, not only technical characteristics are taken into account, but also the wishes of the customer.

This package includes:

  • selection of the type of foundation
  • calculation of technical parameters:

Depth of laying the bottom of the foundation
- load bearing capacity
- indicators of soil stress under the base of the foundation
- cross-sectional area of ​​working reinforcement, etc.

  • detailed drawings of the zero cycle
  • statement of costs of building materials.

The adaptation of the foundation gives a complete guarantee of its strength, and hence the reliability of the entire building. You are guaranteed to get rid of problems such as shrinkage and cracks during the operation of an already finished home. Moreover, often the adapted foundation turns out to be cheaper than the option originally laid down in the project. And this will help save materials and financial resources.

Price: 14,000 rubles.

Foundation Adaptation Package

Foundation Adaptation Package

Preparation of a foundation project for a specific site

  • Price RUB 14,000

Individual design

If you decide to build a house, then you have your own idea of ​​how your dream home should be. And if none of the typical projects suits you, it makes sense to think about an individual project. In addition, all your wishes will be taken into account as much as possible: the level of comfort, the composition of the family, even the view from the window. It is clear that such a project will not be cheap. But you will know for sure that there is no other such thing.
Sometimes, however, you have to resort to individual design forcibly. For example, a developer got a plot of land with a non-standard configuration, and not a single typical project simply fits into it. And it also happens that the number of changes made by the customer is such that it is easier and cheaper to design a house from scratch.

Stages of work on an individual project:

  • development of technical specifications for designing a house
  • contract for design work
  • preparation of a draft design: linking the building to the terrain, external and internal views, layouts, sections
  • detailed study of the sections of the project.

In addition, you can also order:

  • projects of additional structures - garage, workshop, baths, etc.
  • visualization of the project in 3D format.

Ultimately, the customer receives a package of design documentation, consisting of architectural and structural sections.

The project presents:

  • General plan of the house with reference to the boundaries of the site.
  • Floor plans, which indicate the thickness of the walls, lintels and partitions, the area of ​​the premises, the specification of windows and doorways.
  • Facade plans with indication of finishing materials and color schemes.
  • Sections of the building and main units.
  • Drawings and sections of the foundation, bill of materials.
  • Calculation of overlap, roof truss system, roof insulation and waterproofing units.

You can decide on the style of your future home in the "Individual Design" catalog.

Price: from 450 rubles. /

Individual design

Individual design

Realize your personality with an individual project!

  • Price: from 450 rubles. / m²

Package "Tender proposal"

For any developer, a question from a funny nursery rhyme "what should we build a house ...?" far from idle. Moreover, the cost of building a house depends on many factors. Therefore, it is not necessary to estimate the costs "by eye". Without complete information, it will not work to count everything to the smallest detail and, in the end, it will cost itself more. And, besides, a careful calculation of the cost of materials and work affects not only your finances, but also the timing of the construction of the house.

You can calculate the construction costs as accurately as possible using the "Tender Offer" service developed by our specialists. In fact, this is a document that provides a complete list of all building materials and works, indicating their volumes.

The presence of a tender offer allows:

  • get a real picture of the costs of the upcoming construction
  • attract a construction company that is able to offer the most favorable conditions for the performance of work
  • not only understand the essence of the construction process, but also competently control the consumption of building materials, independently adjusting prices for each item
  • competently control the actions of contractors at all stages of construction

a tender offer, supported by information on the cost of materials and construction work, is a serious argument for obtaining credit from a bank.

Package "Tender proposal"

Order a detailed quote. Build to your advantage!

  • Price RUB 10,500

Anti-ice package

Drifts and ice on the roof of your house in winter are a lot of trouble. You can, of course, climb onto the roof and wave a shovel in the cold for 2-3 hours - business. But effective systems of snow melting and anti-icing have long been invented and widely used. They are based on heating cables. The system is organized according to the same principle as the "warm floor". Only more powerful and less cable laying.

The "Antiled" package is developed taking into account the peculiarities of the power supply of the house:

for roofs and gutters: snow melting in gutters, at the edge of the roof in order to prevent icicles and ice formation in pipes

for the entrance group: heating of steps, paths and open areas

for the driveway to the garage: heated driveways

in addition, sometimes the Antiled system is used for heating the soil in greenhouses, and for landscape heating of flower beds, lawns and lawns, as well as for heating sports facilities.

During the design process, the minimum power consumption is calculated and fire safety is ensured. When creating the Anti-Ice system, it is recommended to use only certified self-heating elements that do not support combustion. In addition, the system is equipped with an overheating cut-off device or a differential circuit breaker to automatically shut down the system when energy loss is detected. If the system turns out to be too large, it is broken down into smaller sections. It's easier to manage her work this way.

Important:

for a multi-pitched roof, the Antiled system will be designed by our specialists according to an individual order.

Price: 4500 rub.

Anti-ice package

Anti-ice package

Your comfort and safety in winter

  • Price RUB 4,500

Lightning protection package

Often, developers do not attach much importance to protecting their own homes from lightning: someone saves, someone thinks, someone hopes for "maybe". But 3-4 years after the construction of the house, many people remember about lightning protection. During a thunderstorm, all household appliances burned out at a neighbor's roofing felts, or statistics about how many fires occur due to lightning in a year.

We propose to solve the issue immediately: to provide for protection already at the design stage of the house. It is worth thinking about this, if only for purely aesthetic reasons - it will not be necessary to hammer the walls of the house once again and pull the down conductor along the facade, disrupting the well-thought-out appearance of the building.

Home lightning protection is a system of devices located both outside the home and indoors. External lightning protection prevents lightning from entering the house, internal - protects the power grid from sudden voltage surges. And special devices protect electrical engineering from sudden changes in the electromagnetic field in the radius of a lightning strike.

The package "Lightning protection" includes

  • layout diagram of the location of lightning rods that absorb direct lightning strikes
  • sectional diagram of the down conductor that carries the current from the lightning rod to the ground
  • circuit diagram of the grounding circuit, which distributes lightning energy in the soil, ensuring complete safety
  • averaged resistance calculations
  • detailed list of required materials
  • recommendations for the implementation of the project.

The Dom4M Lightning Protection package guarantees you the safety of your home even in the worst thunderstorm.

Lightning protection package

Lightning protection package

Lightning protection: think about safety in advance

  • Price RUB 3,100

Central vacuum cleaner package

"Central vacuum cleaner" is a kind of aspiration system(removal of small particles by sucking them in an air stream).

The system consists of:

  • vacuum cleaner(installed in a technical room);
  • duct system along which the dust-air mass moves (more often hidden installation is carried out in the preparation of the floor or in the space behind the false ceiling);
  • wall inlets and pneumatic hoses(a flexible hose with a telescopic bar and a nozzle is connected to the former, as in a conventional vacuum cleaner, the latter are designed for express cleaning, as a rule, in the kitchen).

Pros:

  • removable dusty no air enters back into the room, and "thrown out" after the unit into the street;
  • No noise in the cleaned rooms.
  • Convenience of cleaning without "pulling" the vacuum cleaner from room to room, without using extension cords.
  • Concealed installation system, there is nothing in the room except a wall inlet.

Project price: from 3100 rubles.

Central vacuum cleaner package

Central vacuum cleaner package

An integral part of a modern home - comfort, cleanliness and fresh air

  • Project price: from 3 100 rubles.

Comfort home package

Explanatory dictionaries claim that comfort is a combination of household amenities, without which life is unthinkable.
modern man in a modern house. Most of these amenities are laid down at the design stage. But we are ready to expand their list and help clients make their own home as comfortable as possible.

Therefore, our company Dom4m has developed a "Comfortable Home" package for you, which will allow you to make your home cooler on a hot summer day, and in winter cold - cozy and warm.

The Comfort House package includes

  • Underfloor heating project. This is a modern home heating technology. It can be used by connecting to both local and centralized heating systems. In addition, underfloor heating can be both the main and additional heat source in the room. The main advantage of the system is that it creates a uniform thermal regime, does not dry the air, and at the same time fits organically into any interior.
  • Ventilation system design with recuperation. Unlike traditional systems, recuperation ventilation offers significant operational savings. The essence of the system is that the exhaust air passing through the recuperator gives up its heat to the cold stream coming from the street. All ingenious is simple. This system allows you to significantly reduce heating costs. Savings up to 80%. And, in addition, the load on the network is reduced. In the summertime, the heat recovery ventilation system can cool the warm outdoor air. And here you are already reaping the savings from reduced energy consumption when air-conditioning your home.
  • Air conditioning system project. Such a project offers you a choice of a duct air conditioner with air distribution throughout the premises or a multi-split system, which allows several indoor units to be connected to an external unit at once.

The variety of house shapes is impressive, but not all of them are dictated by fashion and beauty. There are those aimed primarily at rationalizing the existing territory, which may not have the most correct geometric shapes.

So, for example, L-shaped houses began to be built on corner plots, where the construction of a rectangular house was very difficult due to the fact that such a house would occupy a significant part of the land plot. Initially, designers and builders sought to reduce the area under the house.

House project with the letter G sheathed with clapboard

And then the projects were overgrown with design solutions that make the house, designed and built in the shape of the letter L, not only functional, rational and compact, but also stylish and beautiful.

In this article, we will look at the key points to pay attention to when choosing an L-shaped house project. We will acquaint you with the advice of builders and designers for arranging this type of house. Let's define the advantages and disadvantages of L-shaped structures.

Before you start building a house, you need to determine its location on the site. And here the experts share their advice:


What else should you pay attention to when designing an L-shaped house? Of course, to organize the entrance to the house. In this case, several options are possible.

In the first case, projects of L-shaped houses are proposed to organize one entrance located in the inner corner of the house. In this case, the entrance to the dwelling will always be protected from bad weather, but this location is not always convenient. Therefore, an alternative to these projects is to organize an entrance from one of the gables of the house. Often it is combined with.

Variant of the layout and arrangement of premises in the cottage with the letter G

But this is not always functional, for example, if the house is intended for several generations or just a large family. Therefore, the most rational is the organization of two independent entrances to the house, located from different gables of the building.

There is one point that you should pay attention to even at the design stage of the house - this is the width of the gables. It can be the same for both wings of the building or different. Often the pediment is made wider in length. This technique does not distort the architecture of the building, making the facade of the home more attractive and stylish.

Depending on the style in which your L-shaped home is made, or.


Project of a stylish modern house with the letter G

The most demanded projects are L-shaped houses made of rounded or glued beams. , made in the shape of the letter G, country and. As in the case of U-shaped houses, experts do not recommend building multi-storey buildings from a bar in the shape of the letter G. It is worthwhile to limit ourselves to the construction of one floor.

If a one-story house is small for you in area, then it is better to equip an attic and a high basement than a full second floor.

This is due to many reasons, but the main one is that it is much easier to redevelop and repair. Drawings of L-shaped houses suggest the arrangement of a built-in garage, a terrace or a spacious veranda.

Buildings on this type of plot can be erected in several basic versions. A house with the letter "G" is suitable for a small area of ​​an oblong shape, where it is impossible to implement the design documentation of a square house. Such a house will be comfortable and practical. Often a given building has only one floor. Projects of this kind of corner houses are suitable for those who want everything they need to be always at hand and does not require climbing and descending stairs. This option, in particular, is quite suitable for the construction of a country house.

The two-storey building is chosen by those who strive for space and an abundance of rooms, as well as owners of large families. It is also quite possible to build imposing buildings on corner lots. The number of floors, balconies, verandas may vary. Significant corner house projects are very popular due to their ability to fully unleash the creativity of their owners.

How the project is being worked on

Before going to the architect, it is worth considering a rough plan of your future home. Then it will be easier for you to explain to the specialist what you want. At the first stage of cooperation, a technical assignment is created. It goes to the designers who work out every detail of the future home. Projects of corner houses provide for the creation of an estimate of costs, which is finally specified upon completion of work on the documentation.

It should be noted that experienced and qualified designers do more than make your plans come true. They are ready to offer you a solution to any architectural problem arising in the course of work. Sometimes this leads to the fact that you have to sacrifice one or more creative ideas. But the result is worth it, because your home should be not only beautiful and high-status, but also cozy, comfortable and safe. Corner house projects can be selected from our catalog of ready-made projects or ordered individually. But whichever way of cooperation you choose, the work of real professionals is always transparent and always consistent with your preferences.

The modern construction industry offers an abundance of building projects with different layouts, different number of storeys and configurations. The project of the future country house must be selected based on the characteristics of the site, its relief and area, the client's wishes for style and layout.

The project of a corner house becomes the only way out for an elongated site, as well as a site with a difficult relief (cliffs, ravines, elevation differences). The project of a corner brick house is also suitable for those developers who prefer original buildings in a modern style.

Most often, suburban corner buildings have one floor and are stretched across the entire territory of the site. However, there are projects with two or more floors. This layout allows you to divide the areas for recreation and reception of guests, and in the basement you can place technical rooms, storerooms and playrooms. A terrace or balcony is located on the second floor. An attic as a second floor helps to reduce the construction budget while conserving usable space.

The corner building has both pros and cons. The advantages of such buildings include:

  • original layout,
  • compactness,
  • the possibility of combining a bath, garage and house under one roof,
  • The angular shape of the building allows you to organize a patio where you can place a small flower garden or a garden with a fountain.

Among the disadvantages are the high costs of heating the house due to the seen perimeter of the walls and the increased cost of construction. Ready-made projects for corner buildings take into account the characteristics of the house, its layout, adjacent utility rooms, characteristics of the site, its relief and type of soil, communications, etc. Such projects are created by professional designers, which ensures the durability and safety of the built house. That is why it is worth contacting only specialists for a house project. They will prepare a typical project of a country house or listen to the wishes of the customer to create an individual project.

A corner house is not just the only possible construction option for an elongated site, but also a building that makes the most rational use of free space. For all their compactness, such houses have many rooms that are conveniently located in different zones. A high-quality finished project of a corner house is a guarantee of comfort and coziness for many years!